2,500 psi · water only, zero chemicals

Hydro jetting in Lakeland, FL

Water forced through a nozzle to break up blockages and scour the pipe wall. Nozzle selection is matched to the pipe and to the material in it, which is what decides whether the job takes four hours or a day. No chemicals enter your system or the water it discharges into.

Request a quote What we need to quote it

5.0 from 9 Google reviews 20+ years underground infrastructure 24/7 emergency response

GapVax jetter trailer set up beside an open manhole with the blue jetting hose fed into the line

Pressure2,500 psi

ChemicalsNone

ReportNot issued

CoveragePolk · Hillsborough · Orange

Why it gets ordered

Breaking up pipe blockages without digging

Jetting is the motion of water forced down a pipeline through a nozzle. As the nozzle is drawn back it scours the wall and drives debris back toward the structure, where it can be removed.

Where a vacuum truck lifts material out, jetting breaks it up and moves it. Which one you need depends on whether the material has to leave the system or simply stop blocking it.

Straight answer

The nozzle decides the jetting job

Different pipe and different material call for different nozzles. A penetrator drives water forward to open a clog. Others push it sideways to scour the wall. Choosing wrong costs hours.

Nozzles wear. Water quality decides how fast, because grit passing through the jets opens the orifices and drops the force. Our trucks filter the water for that reason.

The InSight Standard

How a hydro jetting service runs

Water only, at 2,500 psi, with the nozzle matched to what is actually in the pipe.

GapVax jetter control panel and loaded blue hose reel ready to deploy

01 · MATCH

Nozzle to the problem

Pipe size, material and the type of blockage decide the nozzle. Grease, roots and hard sediment each need a different tip.

Hydro jetting trailer set up over an open manhole with the hose fed into the line

02 · JET

Down the run and back

The hose is fed the length of the segment, then drawn back under pressure so the nozzle scours the wall on the return.

Combination vacuum truck positioned to remove debris driven back by jetting

03 · CLEAR

Material removed or moved

Debris driven back to the structure is vacuumed out if you have booked the truck, or moved downstream if the goal was simply to restore flow.

What that looks like on the day

Scope before we roll. Pipe size, footage, what you think is in the line and where the water comes from. Nozzle selection starts on this call.
Site walkthrough. Crew looks over access and traffic and holds a tailgate meeting before anything opens.
Set up and filter. Trailer positioned, water taken on and filtered. Grit in the supply opens the jets and drops the force, so this step protects the whole job.
Feed the run. Hose fed the length of the segment so the nozzle starts from the far end.
Draw back under pressure. The nozzle scours the wall on the return, driving material back toward the structure.
Clear the structure. Debris driven back is vacuumed out if the truck is booked, or moved on if restoring flow was the goal.
Check the result. Where a camera is booked, we run it after cleaning.

Real captures

What hydro jetting is actually removing

Real captures from cleaning and inspection work across Polk County.

GapVax G7 jetter trailer with loaded blue hose reel, staged lakeside in Lakeland FL — **The jetter itself.** Pressure and flow at the panel, with the nozzle doing the actual work at the far end.

Root mass intruding into a pipe at a lateral connection — **Root mass at a joint.** Cutting restores flow. It does not close the entry point, which is what a camera finds.

CCTV crawler camera inside a heavily coated pipe — **Grease on the wall.** Build up narrows the bore steadily, then blocks it all at once.

Debris and standing water in a brick manhole chamber before cleaning — **Where it ends up.** Material driven back collects at the structure, where the vacuum can lift it out.

Before you ask for a price

What we need to quote hydro jetting accurately

Most requests arrive with a location and nothing else. That is fine, we will come back and ask. But if you have these, you get a real number instead of a range.

Send what you have

Job site location and access
Pipe size and material if known
Linear footage of the run
Sanitary or storm
What you think is in there: grease, roots or sediment
Where the water source is on site
Whether debris needs removing or just clearing
Approximate age of the line

Do not have all of it? Send what you do have. Missing items are usually one phone call, not a site visit.

The arithmetic

What a narrowing sewer line costs you

Grease does not sit in the middle of a pipe. It builds on the wall, and the opening closes a little at a time until the day there is no flow left.

That day is rarely convenient. The backup surfaces at a fixture, at a tenant, or in a kitchen during service, and by then it is an operations problem with a cost that has nothing to do with plumbing.

Jetting on a cycle keeps it as maintenance work with a known number.

When jetting is the right call

Preventive Sanitary lines every couple of years, sooner where fried food volume is high

Grease and FOG Restaurant corridors, food processing and commercial kitchens

Roots Cutting root mass at joints before it catches solids and blocks the run

Before inspection Opening the line so the camera has something to see

Storm season Clearing sediment ahead of the June to November rains

Preventive maintenance

Preventive maintenance plans for sewer lines

Most emergency calls are lines nobody had looked at in years. A maintenance plan puts your lines on a cleaning schedule matched to your load, so the backup that stops operations does not happen in the first place.

Plans are sized to the site, the pipe and what feeds it. There is no one size fits all, so call and we will scope it with you.

Priority scheduling

You are on the calendar ahead of first come, first served.

Peace of mind

Cleaned on an interval that matches your load, not a guess.

One emergency call-out

At the regular rate, not the emergency rate.

Facility manager support

We track the schedule and reach out when you are due, so nobody has to remember.

Call for details

Who orders this

Who orders hydro jetting in Lakeland

Restaurant and food service

FOG driven blockages in dense restaurant corridors across the Orlando and Tampa markets.

Grease management

Food processing and industrial

Citrus and food processing plants in Polk County where discharge loads the line hard.

Production uptime

Municipal collection systems

Preventive cleaning cycles on sanitary mains before build up becomes surcharge.

Preventive maintenance

Multifamily and HOA

Repeat backups in a building where nobody has looked at the main line in years.

Recurring blockages

Questions we get

Hydro jetting, answered

What pressure do you jet at?

2,500 psi. Higher is not automatically better. Nozzle selection matters more than raw pressure for most blockages.

Do you use chemicals?

No. Water only. Nothing enters your system or the water it eventually discharges into, which matters in Lakeland where stormwater goes into named lakes.

Will jetting damage my pipe?

Not when the nozzle and pressure are matched to the pipe. That matching is the job. Older clay and concrete get treated differently from new PVC.

Does jetting fix roots permanently?

No. Cutting roots restores flow, it does not remove the entry point. If roots keep returning, a camera inspection will show you where they are getting in and what it would take to stop it.

Do I get a report?

Not from jetting alone. Cleaning does not record condition. Book CCTV inspection with it and you get a coded report and video.

Related services

See all services

Where we work

Get a hydro jetting quote in Lakeland

Tell us the line, the footage and what you think is in there. If you are not sure what is in there, that is what the camera is for.

Request a quote Call (863) 864-5790